8 Channel Servo Controller with and without Remote Handset

Micro Miniatures | Model Railways |  8 Channel Servo Controller with and without Remote Handset


Servo motors have many applications for model railways,
as nothing brings more life to a model railroad layout than bits of animation scattered here and there.

Some things which may be operated by servo motors are:

Points (slow motion operation),
Semaphore signals,
Level crossing barriers and gates,
Uncoupling ramps,
Opening and closing both swinging and sliding doors (e.g. engine shed, factory),

Also useful for the animate models ie, swings, cranes, beam engines,
Fairground rides, moving figures sawing, swinging hammers, its really end less.

8 Channel Servo Controller with IR Remote Control Handset

Ref: MM-100-355

8 Channel Servo Controller with IR Remote Control Handset
59.95

Click Image for more Details


Quantity:

Product Details
IR remote handset control

The handset can control 3 of our servo controller boards 24 servos in total.

Designed with the model railway hobbist in mind
Features:
Microprocessor controlled driver board designed to operate eight separate conventional servo motors.
Maintains a 20ms refresh rate.
Using PWM software to drive the servos simultaneously and individually.
All eight servos outputs can be programmable with different start stop positions and movement speeds there are 255 speed steps.
Once the required settings have been established, they are saved in memory on the board.

Trigger inputs to control two presettable positions of movement, this could be in track reed switches, or normal toggle switches etc.
Two Signal outputs per servo activate when servo has reach its programable position.

IR Receiver fitting to a 600mm flying lead.


### Order before 2pm for same day dispatch ###

8 Channel Servo Controller

Ref: MM-100-356

8 Channel Servo Controller
39.95

Click Image for more Details


Quantity:

Product Details
Designed with the model railway hobbist in mind
Features:
Microprocessor controlled driver board designed to operate eight separate conventional servo motors.
Maintains a 20ms refresh rate.
Using PWM software to drive the servos simultaneously and indivdually.
All eight servos outputs can be programmable with different start stop positions and movement speeds there are 255 speed steps
Once the required settings have been established, they are saved in memory on the board.
Trigger inputs to control two presettable positions of movement, this could be in track reed switches, or normal toggle switches etc.
Two Signal outputs per servo activate when servo has reach its programable position.



### Order before 2pm for same day dispatch ###

Adjustable DC-DC Convertor Output range 1.3 - 37 Volts

Ref: FE-100-525

Adjustable DC-DC Convertor Output range 1.3 - 37 Volts
9.49

Click Image for more Details


Quantity:

Product Details
Ideal for converting an input voltage to a different servo operating voltage.
This converter can be adjusted to supply the correct operating voltage for 4.8, 6 and 7.4 volt type servo's
Visual readout of output voltage.
size 65mm x 35mm
input range DC 4.0 - 40 volts
Output range 1.3 - 37 Volts
Max output 2A

### Order before 2pm for same day dispatch ###

Mini Servo 0.12 sec/60 degrees

Ref: FE-101-010

Mini Servo 0.12 sec/60 degrees
2.29

Click Image for more Details


Quantity:

Product Details
Ideal for use with our servo controller

Coreless Motor, All Nylon Gears, Connector Wire Length 150mm
Dimensions: 22 X 11.5 X 22mm
Operating Speed (4.8V no load): 0.12sec/60 degrees
Stall Torque 4.8V: 17.5oz/in 1 kg/cm
Temperature Range: -30 to +60
Degree / Dead Band Width: 7usec
Operating Voltage: 3.0-7.2 Volts
Each servo comes with different types of servo horns and fittings to suit most micro applications.

### Order before 2pm for same day dispatch ###

Extension Servo Lead 500mm 20 inches Male to Female

Ref: FE-101-020

Extension Servo Lead 500mm 20 inches Male to Female
0.95

Click Image for more Details


Quantity:

Extension Servo Lead 900mm 34 inches Male to Female

Ref: FE-101-021

Extension Servo Lead 900mm 34 inches Male to Female
1.50

Click Image for more Details


Quantity:

Servo Motor Controller - Tester

Ref: FA-101-001

Servo Motor Controller - Tester
4.75

Click Image for more Details


Quantity:

Product Details
Handy pocket sized Servo Controller

Output connections for up to 3 servos. Ideal for simultaneously testing.


Neutral mode: make the servo go back to the neutral point.
Automatic "window wiper" mode: make the servo swing like a window wipers

Push button to change between above modes. LEDs indicate mode

Voltage consumption: 4.5-6.0v
Size: 48 x 32 x 14mm
Weight: 31.5 g


### Order before 2pm for same day dispatch ###

Micro Miniatures | Model Railways |  8 Channel Servo Controller with and without Remote Handset