Points Position Indicator

Micro Miniatures | Model Railways |  Points Position Indicator

Points Position Indicator for up to 8 sets of points

Ref: MM-100-251

Points Position Indicator for up to 8 sets of points
25.96

Click Image for more Details


Quantity:

Product Details
Supplied with 8 x RED and 8 x GREEN 3mm LED's with resistors

As solenoid point motors only require a brief momentary contact to operate them, they are usally operated by momentary action toggle switches, push button switches or stud and probes. None of these are able to show the setting of the points on a display panel or LED's

The Point Position Indicator board senses the momantary positive pulses from the switch to the point motor.
When a pulse is detected it then turns on its coresponding output, this could be connected to a LED on a mimic panel or even track signals,
and will show the setting of points operated by solenoid point motors.

The controlling software will also reject any double triggering, from the switches.
There is a memory feature which remembers the point settings whilst power is turned off,
and restores the points postion LED status on power up.

The Points Indicator can show the direction of 8 track points using the supplied 16 LEDs
It can be used with or without a CDU and will detect pulses from +5 to +30 volts AC or DC.
Dimensions 92mm x 62mm



This product was designed by us and is still currently manufactored by us.
We are therefore able to offer full technical telephone/email support if required.


### Order before 2pm for same day dispatch ###

Points Position Indicator with pre-wired LEDs up to 8 sets of points

Ref: MM-100-253

Points Position Indicator with pre-wired LEDs up to 8 sets of points
32.35

Click Image for more Details


Quantity:

Product Details
Supplied with 8 x RED 8 x GREEN Pre-wired 5mm LEDs
and 16 panel mounting LED Clips

As solenoid point motors only require a brief momentary contact to operate them, they are usally operated by momentary action toggle switches, push button switches or stud and probes. None of these are able to show the setting of the points on a display panel or LED's

The Point Position Indicator board senses the momantary positive pulses from the switch to the point motor.
When a pulse is detected it then turns on its coresponding output, this could be connected to a LED on a mimic panel or even track signals, and will show the setting of points operated by solenoid point motors.

The controlling software will also reject any double triggering, from the switches.
There is a memory feature which remembers the point settings whilst power is turned off, and restores the points postion LED status on power up.

The Points Indicator can show the direction of 8 track points using the supplied 16 LEDs
It can be used with or without a CDU and will detect pulses from +5 to +30 volts AC or DC.
Dimensions 92mm x 62mm



This product was designed by us and is still currently manufactored by us.
We are therefore able to offer full technical telephone/email support if required.


### Order before 2pm for same day dispatch ###

Points Position Indicator with Bi-Coloured LEDs for 8 sets of points

Ref: MM-100-252

Points Position Indicator with Bi-Coloured LEDs for 8 sets of points
28.31

Click Image for more Details


Quantity:

Product Details
Supplied with 8 Bi-Coloured Red/Green 3mm LEDs

As solenoid point motors only require a brief momentary contact to operate them, they are usally operated by momentary action toggle switches, push button switches or stud and probes. None of these are able to show the setting of the points on a display panel or LED's

The Point Position Indicator board senses the momantary positive pulses from the switch to the point motor.
When a pulse is detected it then turns on its coresponding output, this could be connected to a LED on a mimic panel or even track signals, and will show the setting of points operated by solenoid point motors.

The controlling software will also reject any double triggering, from the switches.
There is a memory feature which remembers the point settings whilst power is turned off, and restores the points postion LED status on power up.

The Points Indicator can show the direction of 8 track points using the supplied 8 LEDs
The LEDs change colour red to green and green to red as the points change.
It can be used with or without a CDU and will detect pulses from +5 to +30 volts AC or DC.
Dimensions 92mm x 62mm



This product was designed by us and is still currently manufactored by us.
We are therefore able to offer full technical telephone/email support if required.


### Order before 2pm for same day dispatch ###

PPI Pre-wired 5mm Red and Green LED set with Clips

Ref: PPI-PW-LED

PPI Pre-wired 5mm Red and Green LED set with Clips
Price: 9.95   (Inc. VAT at 20%)


Quantity:

PPI 5mm BI Red and Green LED

Ref: PPI-BI-LED

PPI 5mm BI Red and Green LED
Price: 4.99   (Inc. VAT at 20%)


Quantity:

Micro Miniatures | Model Railways |  Points Position Indicator