LED Dimming Controllers

Micro Miniatures | Model Railways |  LED Dimming Controllers

LED and Filament Bulb Slide Dimmer

Ref: SDIM1

LED and Filament Bulb Slide Dimmer
6.95

Click Image for more Details


Product Details
Sliding dimmer control for LED's and bulbs
Input voltage 12volts DC
Size:123mm x 14mm x 26 mm
Maximum output load current 1amp (approx 40 LED's)

Photo shows top and side/bottom of the dimmer.

### Order before 2pm for same day dispatch ###

8 CHANNEL LED AND BULB DIMMER

Ref: MM-100-278

8 CHANNEL LED AND BULB DIMMER
29.95

Click Image for more Details


Quantity:

Product Details
Ideal for Hobbyists for Controlling the LED & Filament Bulb lighting of Model Railways and Dolls Houses.
It also has a great number of other general hobby lighting uses.
Uses PWM software to correctly dim LED's
The dimmer has 8 independent dimable outputs, these are extremely easy to set by adjusting each knob.
On boad LED indicators display brightness settings.
Each of the 8 outputs can power 500ma
2.1mm socket for power input. As fitted to most power supplies.
Requires a 12 volt DC power input.
Dimensions 118mm x 45mm
Supplied with full instructions.

### Order before 2pm for same day dispatch ###

6 x Channel LED/BULB Dimmer High Power Version

Ref: MM-100-276

6 x Channel LED/BULB Dimmer High Power Version
24.95

Click Image for more Details


Quantity:

Product Details
Ideal for Hobbyists for Controlling the LED lighting of Model Railways and Dolls Houses.
It also has a great number of other general hobby lighting uses.
Uses PWM software to correctly dim LED's
The dimmer has 6 independent dimable outputs, these are extremely easy to set and adjust.
Once set the 6 dimming levels are retained after power is turned off, and restored again on next power up.
Each of the 6 outputs can power 500ma
(about 10 Bulbs or 25 LED's) (total 60 bulbs/150 LED's)
Requires a 12 volt DC power input.
Dimensions 65mm x 35mm
Supplied with full instructions.

### Order before 2pm for same day dispatch ###

6 x Channel LED/BULB Dimmer Low Power Version

Ref: MM-100-275

6 x Channel LED/BULB Dimmer Low Power Version
19.99

Click Image for more Details


Quantity:

Product Details
Ideal for Hobbyists for Controlling the LED lighting of Model Railways and Dolls Houses.
It also has a great number of other general hobby lighting uses.
Uses PWM software to correctly dim LED's
The dimmer has 6 independent dimable outputs, these are extremely easy to set and adjust.
Once set the 6 dimming levels are retained after power is turned off, and restored again on next power up.
Each of the 6 outputs can power 100ma
(about 2 Bulbs or 4 LED's) (total 12 bulbs/24 LED's)
Requires a 12 volt DC power input.
Dimensions 65mm x 35mm
Supplied with full instructions.

### Order before 2pm for same day dispatch ###

Micro Miniatures | Model Railways |  LED Dimming Controllers