Ref:IRP12
Speedy Delivery.... FREE UK FIRST CLASS RECORDED DELIVERY with this item
Click image for larger veiw
Control up to 12 points motors by IR remote control. This can be increased to 24 points with the extension unit.
One key press on the handset is all that is required to toggle points motor position.
On PCB/board LED indicator shows points position RED/GREEN i.e. open/closed
Connector for wiring external LEDs perhaps on to a track layout panel. LED Pack Click Here!
Programmable pulse length for powering the points. (no CDU Required).
Auto refresh pulse every 200ms to ensure that the points stay in set position. (Can be turned on/off).
The status/position of all the points can be saved, then next time you power up they will set to the last known position.
Points can be set to all open/all closed with 1 key press.
(This could be handy for setting a known start up situation)
Block point setting, program and save up to 8 different blocks with 16 point combinations of the 24 points
that the controller can control. You can then change up to 16 point combinations with just 2 key presses
Supplied with Remote handset, IR receiver, full instructions & Fitting kit.
More detailed information
