Infrared Remote Controls

 Infrared Remote Control Details (24 output channels) Prices from 75.95
  Control up to 24 lighting outputs from your armchair.

There are 3 models in the 24 channels output range. Designed to suit from the small to largest dolls houses lighting systems,
or lighting the trackside, platform & buildings in a larger model railway layout.

All lights connected to the controller can be turned off/on and individually dimmed from the remote control handset.
There is master dimming key, which affects all the lights in the house controlled by the unit.
There is a save feature key, which stores all settings in memory,
so after turning the IR remote controller off, it remembers all the bulb settings off/on and dimmed.
When next turned on the house lights are restored, including the dimming settings.

Programmable feature to turn on/off whole blocks of bulbs.
You can program up to 8 blocks containing up to 8 outputs.
So you could turn on a whole floor with 1 key press. The blocks are saved in memory, and restored after being turned off.

The controller also has an all lights on and all lights off feature.

The handset can be programmed so that if can control up to 8 different houses within the same room with out interfering with each other.

The remote controller can also be connected to our candle or fire flicker units. (models IRMP & IRHP only).
It can then control their outputs turning them off and on. (As well as its own).
It will also save all the flicker controllers lights off/on status to memory and restore these settings when next turned on.

Full handset and wiring instructions included.

All the wiring is connected by screw terminal blocks and the unit is fuse protected for safety.

Total control from your armchair.
 Go to Dolls House lighting Remote Controls.
 Go to Model Railway lighting Remote Controls.
 Infrared Remote Control Details (9 output channels) Includes 2.1amp Power Supply. 59.95
Ideal for a smaller house with up to 9 rooms, and up to 3-4 bulbs per room.

Also Ideal as a model railway trackside & building lighting controller.
Features include, individual off/on of all 9 outputs.

There is a save key, which stores all settings in memory, so after turning the remote controller off,
it remembers all the bulb settings off/on. When next turned on the lights are restored.

The controller also has an all lights on and all lights off feature.

Supplied with 2.1 amp power supply, remote handset and IR receiver

Everything you need to remotely control your dolls house, you just add the lights.
Go to dolls house lighting Remote Controls.